Painting-metal-vent-covers, step 3: spray paint the metal vent covers head outside to your driveway or garage (door open!) and pop the vent covers in a cardboard box to contain the over-spray. give the spray paint can a good shake, then use even strokes to apply the paint. let dry, then add another coat or two until you’ve achieved solid coverage.. When repainting your vent covers use a good quality paint that is especially for metals. apply 2 or 3 light coats instead of one heavy coat for the best look. be sure to paint both sides to seal the cover. if it has louvers be sure those are well painted also., lastly, take a look at your air vents. whether on the ceiling or on the wall. air vents get pretty groddy after awhile. a simple trick is to unscrew them, and simply spray paint!.
Http://diyhipchicks.com/ got ugly vent covers? want them to blend in? you should make them blend into your decor. they are not art work folks. try this super..., a cheaper solution, however, is to paint the vent itself. painting a vent cover in most homes, what seems to be typical is to paint the vent with a regular paint brush. the problem with this method is that the paint tends to ooze through the holes which leads to a partial blockage..
Spray/painting a metal vent is not too hard. it's actually a simple task to do. all you will need to do is remove the loose paint from the metal. if you could remove the paint that would be best..., let’s face it, baseboard radiators are ugly. they’re boxy, often institutional beige, and they tend to accumulate scuffs and splotches of rust. but despite having all the charm and appeal of fluorescent strip lighting, baseboard radiators do serve an important purpose, and those of us who rely on them to heat our homes are more or less stuck with them..
There are many variations of the board and batten look, so there is plenty of room for creativity. take it up high on the walls and paint the remaining space and ceiling a dramatic dark color such as plum or navy. tip: painting metal vent covers in the ceiling the same color helps them blend in and nearly disappear., some advice on not damaging paint arround light switch covers and your vent base if it can come off the wall. use a stanley, carpet cutting knife and carefully cut the paint arround the edges deep enough to feel the roughness of the plaster.